Optical nonlinearity enhancement of graded metallic films

The effective linear and third-order nonlinear susceptibility of graded metallic films with weak nonlinearity have been investigated. Due to the simple geometry, we were able to derive exactly the local field inside the graded structures having a Drude dielectric gradation profile. We calculated the effective linear dielectric constant and third-order nonlinear susceptibility. We investigated the surface plasmon resonant effect on the optical absorption, optical nonlinearity enhancement, and figure of merit of graded metallic films. It is found that the presence of gradation in metallic films yields a broad resonant plasmon band in the optical region, resulting in a large enhancement of the optical nonlinearity and hence a large figure of merit. We suggest experiments be done to check our theoretical predictions, because graded metallic films can be fabricated more easily than graded particles.Comment: 11 pages, 2 eps figures, submitted to Applied Physics Letter

Magnetic relaxation of a system of superparamagnetic particles weakly coupled by dipole-dipole interactions

The effect of long range dipole-dipole interactions on the thermal fluctuations of the magnetization of an assembly of single-domain ferromagnetic particles is considered. If orientational correlations between the particles are neglected, the evolution of the magnetization orientations may be described by a nonlinear Fokker-Planck equation (FPE) reducing to the usual linear one in the limit of infinite dilution [W.F. Brown Jr, Phys. Rev. 130, 1677 (1963)]. The thermally activated relaxation time scale of the assembly is estimated, leading to a simple modification of the axially symmetric asymptotes for the superparamagnetic relaxation time.Comment: 31 pages, 3 figures, regular articl

Solvated dissipative electro-elastic network model of hydrated proteins

Elastic netwok models coarse grain proteins into a network of residue beads connected by springs. We add dissipative dynamics to this mechanical system by applying overdamped Langevin equations of motion to normal-mode vibrations of the network. In addition, the network is made heterogeneous and softened at the protein surface by accounting for hydration of the ionized residues. Solvation changes the network Hessian in two ways. Diagonal solvation terms soften the spring constants and off-diagonal dipole-dipole terms correlate displacements of the ionized residues. The model is used to formulate the response functions of the electrostatic potential and electric field appearing in theories of redox reactions and spectroscopy. We also formulate the dielectric response of the protein and find that solvation of the surface ionized residues leads to a slow relaxation peak in the dielectric loss spectrum, about two orders of magnitude slower than the main peak of protein relaxation. Finally, the solvated network is used to formulate the allosteric response of the protein to ion binding. The global thermodynamics of ion binding is not strongly affected by the network solvation, but it dramatically enhances conformational changes in response to placing a charge at the active site of the protein

Optical nonlinearity enhancement of graded metal-dielectric composite films

We have derived the local electric field inside graded metal-dielectric composite films with weak nonlinearity analytically, which further yields the effective linear dielectric constant and third-order nonlinear susceptibility of the graded structures. As a result, the composition-dependent gradation can produce a broad resonant plasmon band in the optical region, resulting in a large enhancement of the optical nonlinearity and hence a large figure of merit.Comment: 11 pages, 2 figures. To be published in Europhysics Letter

A combined theoretical and experimental study of the low temperature properties of BaZrO3

Low temperature properties of BaZrO3 are revealed by combining experimental techniques (X-ray diffraction, neutron scattering and dielectric measurements) with theoretical first-principles-based methods (total energy and linear response calculations within density functional theory, and effective Hamiltonian approaches incorporating/neglecting zero-point phonon vibrations). Unlike most of the perovskite systems, BaZrO3 does not undergo any (long-range-order) structural phase transition and thus remains cubic and paraelectric down to 2 K, even when neglecting zero-point phonon vibrations. On the other hand, these latter pure quantum effects lead to a negligible thermal dependency of the cubic lattice parameter below ~ 40 K. They also affect the dielectricity of BaZrO3 by inducing an overall saturation of the real part of the dielectric response, for temperatures below ~ 40 K. Two fine structures in the real part, as well as in the imaginary part, of dielectric response are further observed around 50-65 K and 15 K, respectively. Microscopic origins (e.g., unavoidable defects and oxygen octahedra rotation occurring at a local scale) of such anomalies are suggested. Finally, possible reasons for the facts that some of these dielectric anomalies have not been previously reported in the better studied KTaO3 and SrTiO3 incipient ferroelectrics are also discussed.Comment: 8 pages, 5 figures, submitted to Physical Review

Internal Model Control of a Domestic Microwave for Carbon Composite Curing

This paper outlines the conversion of a domestic microwave oven for use in composite curing applications. It compares several strategies for temperature control. The converted oven has vacuum ports, connectors, and fiber optic thermocouple sensors. Experimental data are provided for each control strategy based on a 200 mm× 200 mm eight-ply prepreg laminate. The degree of cure is established for the test samples by thermal analysis techniques. Multiphysics simulation is used to model the electromagnetic and heating effects in the system, and a common and inexpensive method of approximating the available microwave power is used. The low cost of the microwave components and the ease of conversion are desirable characteristicsin this application

Dynamical transition, hydrophobic interface, and the temperature dependence of electrostatic fluctuations in proteins

Molecular dynamics simulations have revealed a dramatic increase, with increasing temperature, of the amplitude of electrostatic fluctuations caused by water at the active site of metalloprotein plastocyanin. The increased breadth of electrostatic fluctuations, expressed in terms of the reorganization energy of changing the redox state of the protein, is related to the formation of the hydrophobic protein/water interface allowing large-amplitude collective fluctuations of the water density in the protein's first solvation shell. On the top of the monotonic increase of the reorganization energy with increasing temperature, we have observed a spike at 220 K also accompanied by a significant slowing of the exponential collective Stokes shift dynamics. In contrast to the local density fluctuations of the hydration-shell waters, these spikes might be related to the global property of the water solvent crossing the Widom line.Comment: 9 pages, 8 figure

An excess of emission in the dark cloud LDN 1111 with the Arcminute Microkelvin Imager

We present observations of the Lynds' dark nebula LDN 1111 made at microwave frequencies between 14.6 and 17.2 GHz with the Arcminute Microkelvin Imager (AMI). We find emission in this frequency band in excess of a thermal free--free spectrum extrapolated from data at 1.4 GHz with matched uv-coverage. This excess is > 15 sigma above the predicted emission. We fit the measured spectrum using the spinning dust model of Drain & Lazarian (1998a) and find the best fitting model parameters agree well with those derived from Scuba data for this object by Visser et al. (2001).Comment: accepted MNRA

Dipolar response of hydrated proteins

The paper presents an analytical theory and numerical simulations of the dipolar response of hydrated proteins. The effective dielectric constant of the solvated protein, representing the average dipole moment induced at the protein by a uniform external field, shows a remarkable variation among the proteins studied by numerical simulations. It changes from 0.5 for ubiquitin to 640 for cytochrome c. The former value implies a negative dipolar susceptibility of ubiquitin, that is a dia-electric dipolar response and negative dielectrophoresis. It means that a protein carrying an average dipole of ~240 D is expected to repel from the region of a stronger electric field. This outcome is the result of a negative cross-correlation between the protein and water dipoles, compensating for the positive variance of the protein dipole in the overall dipolar susceptibility. This phenomenon can be characterized as overscreening of protein's dipole by the hydration shell. In contrast to the neutral ubiquitin, charged proteins studied here show para-electric dipolar response and positive dielectrophoresis. The protein-water dipolar cross-correlations are long-ranged, extending approximately 2 nm from the protein surface into the bulk. The analysis of numerical simulations suggests that the polarization of the protein-water interface is strongly affected by the distribution of the protein surface charge. This component of the protein dipolar response gains in importance for high frequencies, above the protein Debye peak, when the response of the protein dipole becomes dynamically arrested. The interface response found in simulations suggests a possibility of a positive increment of the high-frequency dielectric constant of the solution compared to the dielectric constant of the solvent, in support of the observed THz absorbance of protein solutions.Comment: 15 pp, 9 figure

A Multi-telescope Campaign on FRB 121102: Implications for the FRB Population

We present results of the coordinated observing campaign that made the first subarcsecond localization of a Fast Radio Burst, FRB 121102. During this campaign, we made the first simultaneous detection of an FRB burst by multiple telescopes: the VLA at 3 GHz and the Arecibo Observatory at 1.4 GHz. Of the nine bursts detected by the Very Large Array at 3 GHz, four had simultaneous observing coverage at other observatories. We use multi-observatory constraints and modeling of bursts seen only at 3 GHz to confirm earlier results showing that burst spectra are not well modeled by a power law. We find that burst spectra are characterized by a ~500 MHz envelope and apparent radio energy as high as $10^{40}$ erg. We measure significant changes in the apparent dispersion between bursts that can be attributed to frequency-dependent profiles or some other intrinsic burst structure that adds a systematic error to the estimate of DM by up to 1%. We use FRB 121102 as a prototype of the FRB class to estimate a volumetric birth rate of FRB sources $R_{FRB} \approx 5x10^{-5}/N_r$ Mpc$^{-3}$ yr$^{-1}$, where $N_r$ is the number of bursts per source over its lifetime. This rate is broadly consistent with models of FRBs from young pulsars or magnetars born in superluminous supernovae or long gamma-ray bursts, if the typical FRB repeats on the order of thousands of times during its lifetime.Comment: 17 pages, 7 figures. Submitted to AAS Journal